Search results for " measurements"
showing 10 items of 547 documents
Effect of high temperature annealing (T > 1650 °C) on the morphological and electrical properties of p-type implanted 4H-SiC layers
2019
This work reports on the effect of high temperature annealing on the electrical properties of p-type implanted 4H-SiC. Ion implantations of Aluminum (Al) at different energies (30-200 keV) were carried out to achieve 300 nm thick acceptor box profiles with a concentration of about 10(20) at/cm(3). The implanted samples were annealed at high temperatures (1675-1825 degrees C). Morphological analyses of the annealed samples revealed only a slight increase of the surface roughness RMS up to 1775 degrees C, while this increase becomes more significant at 1825 degrees C (RMS = 1.2 nm). Room temperature Hall measurements resulted in a hole concentration in the range 0.65-1.34 x 10(18)/cm(3) and m…
Localization from inertial data and sporadic position measurements
2020
International audience; A novel estimation strategy for inertial navigation in indoor/outdoor environments is proposed with a specific attention to the sporadic nature of the non-periodic measurements. After introducing the inertial navigation model, we introduce an observer providing an asymptotic estimate of the plant state. We use a hybrid dynamical systems representation for our results, in order to provide an effective, and elegant theoretical framework. The estimation error dynamics with the proposed observer shows a peculiar cascaded interconnection of three subsystems (allowing for intuitive gain tuning), with perturbations occurring either on the jump or on the flow dynamics (depen…
A prototypal architecture of a IEEE 21451 network for smart grid applications based on power line communications
2015
This paper deals with the development of reliable measurement and communication devices and systems and their integration on a prototypal network architecture for smart grid applications, based on the use of narrowband power line communications (PLCs). The proposed solution is presented and discussed in the framework of the ISO/IEC/IEEE 21451 family of Standards. Currently, PLCs are not properly addressed by the aforesaid Standards; on the other hand, by including such issue, their guidelines could represent a common platform for the integration and interoperability of the proposed systems and devices. This would allow to exploit the benefits of the IEEE 21451 approach also for PLC-based sm…
Experimental Assessment of the Backoff Behavior of Commercial IEEE 802.11b Network Cards
2007
It has been observed that different IEEE 802.11 commercial cards produced by different vendors experience different performance, either when accessing alone the channel, as well as when competing against each other. These differences persist also when thorough measurement methodologies (such as RF shielding, laptop rotation, etc) are applied, and alignment of the environmental factors (same laptop models, traffic generators, etc) is carried out. This paper provides an extensive experimental characterization of the backoff operation of six commercial NIC cards. It suggests a relevant methodological approach, namely a repeatable, well defined, set of experiments, for such a characterization. …
Isoelectronic series of oxygen deficient centers in silica: experimental estimation of homogeneous and inhomogeneous spectral widths
2008
We report nanosecond time-resolved photoluminescence measurements on the isoelectronic series of oxygen deficient centers in amorphous silica related to silicon, germanium and tin atoms, which are responsible of fluorescence activities at approximately 4 eV under excitation at approximately 5 eV. The dependence of the first moment of their emission band on time and that of the radiative decay lifetime on emission energy are analyzed within a theoretical model able to describe the effects introduced by disorder on the optical properties of the defects. We obtain separate estimates of the homogeneous and inhomogeneous contributions to the measured emission line width, and we derive homogeneou…
Evaluation of Esophageal Motility Using Multichannel Intraluminal Impedance in Healthy Children and With Gastroesophageal Reflux
2010
Abstract OBJECTIVE: : Multichannel intraluminal impedance (MII) directly evaluates esophageal bolus transport. There is a good correlation between MII and manometry in healthy adults, but there are no reports concerning children.The aim of the present study was to determine normal values of esophageal motility using only impedance measurements in healthy children and in a pediatric population with gastroesophageal reflux (GER). PATIENTS AND METHODS: : We described in the present study 60 children submitted to pH-MII for 24 hours for suspected GER. Patients were divided into 2 different groups on the basis of their pH-MII report. Group 1 patients showed acid GER, whereas group 2 patients had…
Evaluation of the MOD16A2 evapotranspiration product in an agricultural area of Argentina, the Pampas region
2021
The Pampas Region is a big plain of approximately 520,000 km2 in Argentina. It is essential to estimate evapotranspiration (ET) in this region since the primary productivity is directly linked to water availability. Information provided by satellite missions allows monitoring the spatial and temporal variability of ET. In the current study, we evaluated the version 006 of MOD16A2 product (MOD16A2.006) of Potential Evapotranspiration (ETp) and Actual Evapotranspiration (ETa) in Argentinian Pampas Region (APR). MOD16A2.006 product was compared with Crop Evapotranspiration (ETc), calculated with local measurements from the Oficina de Riesgo Agropecuario (ORA), and Crop Coefficient (Kc) data (f…
Field Testing of a Simple Flume (SMBF) for Flow Measurement in Open Channels
2008
In this paper the stage–discharge relationship of a new flume named SMBF (Samani, Magallanex, Baiamonte, Ferro), originally proposed by Samani and Magallanez and tested by Baiamonte and Ferro, for measuring flow discharge in open channels is reviewed. The flume is obtained inserting two semicylinders in a rectangular cross section. The results of some experimental runs carried out using horizontal flumes characterized by different values of the contraction ratio (ranging from 0.17 to 0.81) are used for determining the two coefficients of the power stage–discharge equation. The stage–discharge equation is tested using flow measurements carried out in the period between December 2004 and Marc…
Mobility determination of lead isotopes in glass for retrospective radon measurements rad
2008
In retrospective radon measurements, the 22-y half life of 210Pb is used as an advantage. 210Pb is often considered to be relatively immobile in glass after alpha recoil implanted by 222Rn progenies. The diffusion of 210Pb could, however, lead to uncertain wrong retrospective radon exposure estimations if 210Pb is mobile and can escape from glass, or lost as a result of cleaning-induced surface modification. This diffusion was studied by a radiotracer technique, where 209Pb was used as a tracer in a glass matrix for which the elemental composition is known. Using the ion guide isotope separator on-line technique, the 209Pb atoms were implanted into the glass with an energy of 39 keV. The di…
A laboratory cave for the study of wall degradation in rock art caves : an implementation in the Vézère area
2013
The aim of this proposal is to present an original approach to the study and preservation of rock art caves. A multidisciplinary study of cave wall alteration will be performed to understand the impact of environmental context on the evolution of wall surfaces. The approach involves the choice of a cave with characteristics similar to painted caves in the studied area (Vézère Valley in Dordogne, France): e.g., cave wall alteration, lithology, morphology, etc. This selected cave is intended to become a laboratory cave, monitored for the acquisition of chemical, physical and biological environmental data on bedrock, air and fluids along with their characteristics. A cave without art or archae…